Directions

Address

East Mill, Bridgefoot, Belper, Derbyshire, DE56 2UA

From M1 Junction 28
1. Follow A38 West towards Derby junction with A610, take A610 towards Ambergate
2. At the T-junction with A6 in Ambergate, opposite 'The Hurt Arms' pub, turn left towards Belper.
3. Approaching Belper, you will see a large red brick building (see map below) on the right hand side, this is the East Mill.
4. Take the first right, before the traffic lights into the car park.
5. * The first parking bays are reserved, but there is a pay and display car park, just past the allocated bays.
6. The entrance to the Mill is over the small bridge, opposite the entrance to the car park, and there are intercom buttons next to the door.
7. Our offices are on the second floor of the building - up one flight of stairs and then follow the Chevin signs
From Derby
1. Follow signs for the A6 to Belper and Matlock.
2. Continue through Belper, and just after the traffic lights, on the left, there is a large red brick building, turn left into the car park, and follow the instructions from * above